| SAMSON SERVO 200
200 WATT DUAL FAN POWER AMPLIFIER
*
*B-STOCK UNIT, with 1 Year Manufacturer's Warranty!
*Picture shown is stock photo, not the actual unit you will receive.
Description
The Samson Servo Series stereo power amplifiers have been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and installers.
The convenient 2 rack-space design is compact, and yet there’s plenty of power available, with 2 x 66 Watts at 8Ω, 2 x 100 Watts at 4 ohms over the full frequency spectrum, from 10 Hz to 55 kHz. For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more single channel power, with power ratings of 200 watts into a 8 ohms load.
Input connections are available for both unbalanced RCA connections and balanced 1/4-inch TRS connections . For the outputs, the Servo Series amplifiers provide standard 5-way binding posts and 1/4” phone jacks. Front-panel controls and displays include a power switch with LED indicator, as well as independent left and right channel input level controls. To help you set the correct operating levels, the Servo Series amplifiers include front panel Signal, Peak and Protection LED indicators. There's also a ten-segment Level VU meter to help you set a good operating level.
Like all serious power amplifiers, the Servo Series internal electronics are based around a serious power-core, with over-sized toroidal transformers and large extruded heat sinks. To keep the Servo Series amplifiers running cool, their design employs twin internal wind tunnels with forced-air cooling via two temperature-sensitive, variable speed fans, which greatly reduce the chance of thermal and overheating problems. Multi-stage protection for power-up, overheating, over-current, short circuit, low output impedance and DC voltage, assures high reliability under the most demanding situations.
The Servo Series amps are road tough with their all steel chassis and19-inch rack mount design. The Servo Series amplifiers are ready for a life on the road, or to make their home in a nice fixed installation. Optimized for live sound venues, houses of worship, commercial installations, and for driving small and medium-sized live PA systems, the Servo Series amplifiers will deliver reliable power from gig-to-gig, venue-to-venue and day-tonight.
Perfect for installation sound, the servo 200 is ideal for powering small to medium sized speaker chains, as well as playback and studio monitors. The servo 200 amplifier features large 10-segment 3-color level LED meters and independent channel volume controls. The Servo amp line also feature a 4-stage power protection circuitry that ensures optimal performance and protection of connected components.
Features
- 100 watts per side at 4 ohms
- 200 watts bridged mono at 8 ohms
- 1/4-inch and RCA input connectors
- 5-way binding post and 1/4-inch outputs
- Dual Rack Space Design
- 10-segment, 3-color Level LED meters
- 4-stage power protection circuitry
Specifications
Stereo both channel driven
8 ohms
Servo 200: 66 Watts x 2
Servo 300: 100 Watts x 2
Servo 600: 225 Watts x 2
4 ohms
Servo 200: 100 Watts x 2
Servo 300: 150 Watts x 2
Servo 600: 300 Watts x 2
Bridged mono
8 ohms
Servo 200: 200 Watts
Servo 300: 300 Watts
Servo 600: 600 Watts
Signal to Noise Ratio (20Hz-20k)
Servo 200: 102dB
Servo 300: 102dB
Servo 600: 104dB
Distortion (SMPTE-IM)
Servo 200: 0.05%
Servo 300: 0.01%
Servo 600: 0.04%
Input sensitivity @8ohms
1.24V(4dBu)
Voltage Gain
Servo 200: 32dB
Servo 300: 33dB
Servo 600: 34dB
Output Circuitry
AB
AC Power @1/8 rated power 4ohms, max.
Servo 200: 0.5A
Servo 300: 0.7A
Servo 600: 1.3A
AC Power @1/3 rated power 4ohms, max.
Servo 200: 1.1A
Servo 300: 1.7A
Servo 600: 3.3A
AC Power @ rated power 4ohms, max.
Servo 200: 3.3A
Servo 300: 5.0A
Servo 600: 10A
Distortion (typical @4 ohms) 20Hz-20kHz,10dB below rated power
Servo 200: 0.01%
Servo 300: 0.01%
Servo 600: 0.03%
IkHz,rated power
0.1%
Frequency Response @8ohms 1Watt
0/-0.5dB:20Hz-20kHz,0/-3dB:5Hz-60kHz
Damping Factor(400Hz)
Servo 200: 280
Servo 300: 280
Servo 600: 350
Input Impedance
15kohm Unbalanced,30kohm Balanced
Input Clipping
10Vrms(22dBu)
Cooling
Continuously variable speed, fan forced air
Connectors (each channel)
Input: RCA unbalanced and1/4”(6.3mm)TRS, balanced
Output: 5-way Binding post and 1/4” Phone
Controls
AC power switch,Channel 1 and 2 volume
Indicators
Power on (blue), Protection (amber), Signal (green) for each Ch., Peak (red) for each Ch. Level: , -24 dB, -20 dB, -16 dB, -12 dB, -8 dB, -4 dB, -2 dB. O, +2 dB and +4 dB (PEAK).
Protection
Short circuit, Thermal, Current limit, DC offset, Current inrush, RF protection, Turn on/Turn off muting
Power Requirements
115/230,240VAC,50/60Hz
Dimensions (WXHXD)
19”(483mm)X3.5”(89mm)X11.7”(297mm)
Net Weight
Servo 200: 15 lbs 6.82 kg
Servo 300: 20 lbs 9.09 kg
Servo 600: 24 lbs 10.91 kg
* 1 Year Manufacturer's Warranty
*B-Stock units are pieces that were returned to the manufacturer by a dealer or customer for one reason or another. Typically a blown speaker, bad wiring, or minor cosmetic damage. The units are repaired to working order and sold as B-Stock. These B-Stock units carry the same 1 yr manufacturer's warranty as new units.
|
Sign In
