SHOP BY BRAND

PEAVEY CS 3000  3,000 Watt Stereo Power Amplifier   Designed for years of reliable operation, CS Series amplifiers offer the sonic superiority and unsurpassed reliability for which Peavey is famous in a rugged, compact unit. Advanced technologies and extensive protection circuitry allow operation with greater efficiency, even under difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuit ensures trouble-free operation into loads as low as 2 ohms (4 ohms for model CS 4080 HZ), protects speakers and ensures, protects drivers and ensures sonic integrity even in extreme overload conditions. Peavey’s high-efficiency design uses tunnel-cooled heat sinks and dual-speed DC fans for consistent lower overall operating temperature, resulting in longer output transistor life. Building on the reputation of the world-famous Peavey CS 800, which conquered the power amp market in the 1970s, the CS Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from some of Peavey's most popular audio innovations, including our exclusive DDT compression/anti-clipping protection. With its 2RU design and power points up to 4080 watts, this latest evolution of the CS Series is leaner, louder and lighter than ever.         Features 2-rack-space stereo power amp featuring DDT™ 2 temperature-dependant variable speed fans 1550 watts (rms) per channel at 2 ohms 1065 watts (rms) per channel at 4 ohms 650 watts per channel at 8 ohms 3100 watts at 4 ohms bridged 5-year warranty   Weight Packed: 46.00 lb(20.865 kg) Width Packed: 6 Depth Packed: 22.5 Height Packed: 21 Specifications Rated Power Bridged 3,050 watts @ 1 kHz at <0.1% T.H.D. @ 4 ohms Rated Power 2 x 2 ohms 1,500 watts per channel @ 1 kHz <0.05% T.H.D. both channels driven Rated Power 2 x 4 ohms 1,025 watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven Rated Power 2 x 8 ohms 650 watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven Rated Power 1 x 2 ohms 2,000 watts @ 1 kHz at <0.1% T.H.D. Rated Power 1 x 4 ohms 1,275 watts @ 1 kHz at <0.05% T.H.D. Rated Power 1 x 8 ohms 750 watts @ 1 kHz at <0.05% T.H.D. Minimum Load Impedance 2 ohms Maximum RMS Voltage Swing 86 volts Frequency Response 10 Hz - 100 kHz; +0, -1.5 dB at 1 watt Power Bandwidth 10 Hz - 35 kHz; +0, -3 dB at rated 4 ohms power T.H.D. 2 x 2 ohms <0.2% @ 1,200 watts per channel from 20 Hz to 20 kHz T.H.D. 2 x 4 ohms <0.1% @ 925 watts per channel from 20 Hz to 20 kHz T.H.D. 2 x 8 ohms <0.1% @ 600 watts per channel from 20 Hz to 20 kHz Input CMRR > - 55 dB @ 1 kHz Voltage Gain x 40 (32 dB) Crosstalk > -55 dB @ 1 kHz at rated power @ 8 ohms Hum and Noise > -109 dB, “A” weighted referenced to rated power @ 8 ohms Slew Rate > 15V/us Damping Factor (8 ohms) > 500:1 @ 20 Hz – 1 kHz Phase Response +5 to - 15 degrees from 20 Hz to 20kHz Input Sensitivity 1.6 volts +/- 3% for 1 kHz. 4 ohms rated power, 1.37 volts +/- 3% for 1 kHz. 2 ohms rated power Input Impedance 15 k ohms, balanced Current Draw @ 1/8 power 1,540 watts @ 2 ohms, 1,000 watts @ 4 ohms, 610 watts @ 8 ohms Current Draw @ 1/3 power 3,650 watts @ 2 ohms, 2,510 watts @ 4 ohms, 1,535 watts @ 8 ohms Cooling: Two back panel temperature dependant variable speed 80 mm DC fans Controls: 2 front panel attenuators, rear panel Mode switches Indicator LEDs: 2 DDT™ (clip limiting), 2 Signal presence, 2 Active Status Protection: Thermal, DC, turn-on bursts, subsonic, incorrect loads Connectors: Combi XLR & 6.3 mm phone input, Speakon® and Binding Post speaker output, 15 amp IEC mains connector Construction: 16 ga. steel with cast front panel and cast handles Dimensions 88.9mm x 482.6mm x 376.3mm + 31.8mm for rear support ears and connectors (3.5”x19”x 14.81” + 1.25”) + (1.5”) for handle depth Net Weight 18.05 kg (39.8 lbs.) Gross Weight 19.23 kg.(42.4 lbs.)

E-mail a friend about this item.

RETURN TO SEARCH RESULTS LIST