| Crown XTi 2000
Power Amplifier with up to 1000 Watts at 2 ohms
The XTi Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models, each in a uniform, rugged chassis. The XTi Series incorporates the best of tried-and-true design principles and innovative features. Modern power amplifiers are sophisticated pieces of engineering capable of producing extremely high power levels. The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes 3 models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class.
XTi-Series amplifiers feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon and binding-post outputs, short-circuit protection and more.
With their powerful, reliable performance, XTi-Series amps easily handle 2-ohm loads and are capable of chest-thumping lows. Plus, your investment in an XTi-Series amplifier is backed by Crown's 3-Year, No-Fault, Fully Transferable Warranty.
Features
-
Integrated proprietary DSP with LCD front panel display
-
Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
-
Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
-
Extremely versatile, handling a wide range of speaker impedances and outputs
-
Switch-mode universal power supply (100V, 120V, 220-240V 50/60 Hz)
-
Speaker presets for crossover frequencies, EQ, limiting, and delay
-
All products fill 2U rack spaces and weigh under 17 lbs.; weight sets a new standard in lightweight amps (20% less)
-
Speakon and binding post outputs, XLR inputs and loop-thrus
-
Comprehensive LED status per channel
-
3-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Specifications
Sensitivity (volts RMS) for full rated power at 4 ohms
1.4V
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz)
+0/–1 dB
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted
100 dB (103 dB in XTi 6000)
Damping Factor (8 ohm): 20 Hz to 400 Hz
> 500
Input Stage
Input is electronically balanced and employs precision 1% resistors.
AC Line Current (120VAC amplifi er playing 1/8 power pink noise into 4 ohms per ch)
XTi 1000: 6.8A,
XTi 2000: 8.3A,
XTi 4000: 10.5A; at idle draws no more than 30 watts.
XTi 6000: 15.3A; at idle draws no more than 180 watts.
Crosstalk (below rated power) 20 Hz to 1 kHz
> 70 dB
Input Impedance (nominal)
20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Stereo: 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions)
Bridge mono: 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions)
Voltage Gain (at 1 kHz, 8 ohm rated output)
XTi 1000: 30.5 dB.
XTi 2000: 32.9 dB.
XTi 4000: 34.2 dB.
XTi 6000: 37.1 dB.
Maximum Input Signal
+22 dBu typical
Operating Temperature
0° C to 40° C at 95% relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%)
100V, 120V, 220-240V 50/60 Hz
Ventilation
Flow-through ventilation from front to back
Cooling
Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface)
EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D
XTi 6000 is 16.2 in. (41.15 cm) D
Net Weight, Shipping Weight
XTi 1000, 2000 & 4000: 18.5 lb (8.4 kg), 21.5 lb (9.8 kg)
XTi 6000: 24.0 lb (10.9 kg), 30.0 lb (13.6 kg)
|
Sign In
