| Community S-3294
3 Way Full Range Loudspeaker
S-Series is a family of affordable, linear response loudspeakers designed for use in applications requiring controlled coverage patterns, high-impact power response, with clear and intelligible sonic output. All models are designed with portability in mind, but they are equally effective in permanent or semi-permanent installations. S-Series loudspeakers are flexible, easy to set up and use, and most importantly they provide superb sound quality.
S-Series consists of four portable full-range models and two subwoofers, all featuring low distortion, high-impact sonic capability, and durable construction. The S-3294 is three-way, full-range loudspeaker with a 12-inch LF cone driver, a 6.5-inch horn-loaded MF cone driver, and a 1-inch horn-loaded HF compression driver.
S-Series is ideal for live sound, club systems, public address, and mobile DJ rigs. All S-Series models feature durable Birch plywood enclosures, integrated speaker cups, protective steel grilles, linear phase crossovers, DYNA-TECH protection circuitry, seat track rigging, and Easy-Grip handles. Full-range loudspeakers include a passive/bi-amp selection switch and music/speech presence switch to accommodate the acoustical conditions of the venue. Subwoofer systems feature a high-pass output switch for seamless integration with the full-range models. All S-Series models are precision engineered, both acoustically and structurally, to perform night after night.
Features
-
Sophisticated internal crossover networks for reduced off-axis lobing and consistent coverage throughout the crossover region.
-
Selectable crossover modes (bi-amped or passive single-amped).
-
Carbon Ring Cone Technology; used on all full-range low-frequency drivers for reduced distortion, enhanced transient response, and 30% greater cone area than conventional cone drivers.
-
Ferrofluid-cooled high-frequency and mid-frequency drivers for improved heat conductance and dramatically reduced distortion through viscous damping of driver resonant modes.
-
Music / Speech PRESENCE Switch re-voices the loudspeaker’s tonal balance for increased articulation in the vocal range.
-
Powerful 1-inch-throat high-frequency compression drivers offer extended high-end response, smooth output, and lower distortion than larger format drivers.
-
Non-metallic high-frequency diaphragms provide a further reduction in distortion by eliminating the mechanical resonance normally associated with brittle metallic materials.
-
Geometrically correct, hand-laid fiberglass mid and high-frequency waveguides.
-
Community’s patented Cool-Coil heat evacuation technology minimizes cone driver power compression and ensures long-term reliability (used in subwoofers).
-
DYNA-TECHTM active protection circuitry aids in reducing the likelihood of damage under abusive conditions.
-
Switchable high-pass output on subwoofers maximizes performance when a full range system and a subwoofer are powered by a single amplifier channel.
-
Rugged 11-ply cross-laminated Birch enclosures, coated with a two-part catalyzed polyester paint for durability.
-
Protective steel grilles covered with durable powder-coat finish.
-
Load rated M10 fly points on tops, bottoms and rear of enclosures for safe & easy rigging.
-
Dual NL4-compatible locking connectors, plus dual ¼” jacks allow easy connectivity with readily available cables.
-
Factory designed rigging hardware available from stock.
Specifications
Format:
Three-way full-range, vented bass, switchable passive or bi-amp x-over. Rotatable fiberglass horn
Operating Range: 60 Hz - 20 kHz
Frequency Response: 90 Hz - 16 kHz (±3 dB)
Dispersion (-6 dB): 90º H x 40º V
Maximum SPL @1m: 123 dB continuous / 130 dB peak
Crossover Frequency: 800 Hz / 3 kHz
Sensitivity in SPL:
(1W/1m free space)
100 dB (100 Hz - 12,500 Hz,1/3 octave)
100 dB (250 Hz - 4 kHz, speech range)
Max Power Handling:
(passive)
200W RMS
500W Program / 990W Peak
Impedance (passive): Nominal 8Ω / Min. 2.5Ω at 9.2 kHz
TRANSDUCERS
Low Frequency:
12" (304mm) 200W RMS
500W Program, 8Ω
Mid-Frequency:
6.5" (165mm) 100W RMS
250W Program, 8Ω
High Frequency:
1" (25.4mm) 100W RMS
125W Program, 4Ω
MECHANICAL
Enclosure: 11-ply cross-laminated birch
Finish: Black catalyzed polyester paint
Rigging Provisions:
10 - M10 threaded rigging fittings (four on top, four on bottom, two on rear)
Grille: Steel, powder coated black
Dimensions:
H x W x D
29.3" (744mm) x 17.4" (442mm) x 15.4" (391mm)
Net Weight: 53 lbs / 24 kg
|
Sign In
