| Community MVP-15
15" 500 Watt 2 Way Full Range Speaker System
Then new MVP Series II loudspeakers combine the high-output intensity of raw acoustic power with unrivaled sonic clarity, the product group brings professional-quality sound reinforcement to DJs, bands, and anyone else demanding the best in audio.
All full-range systems utilize Community’s proprietary HF20 High Frequency Compression Driver featuring a ferrofluid cooled non-metallic diaphragm to insure smooth performance and extremely low distortion. Community's Dyna-Tech Driver Protection System safeguards all MVP Series II models. With Dyna-Tech your speaker can operate at its full dynamic range and still react quickly to excessive musical transient peaks without worry of damaging the speaker. It also means your speaker is protected from the instant the power amplifier is plugged into it and/or turned on. Dyna-Tech illuminates a red indicator light found on the input panel of all models
The MVP15 is a rugged, high-efficiency, two-way, full-range loudspeaker system. The system utilizes one HF20 high-frequency driver coupled to a Pattern Control horn and one 15" woofer for high efficiency and excellent power handling capability. These components are matched to an optimally tuned direct radiating bass-reflex enclosure. The recessed handles, black carpeted exterior and injection molded corners also make this system attractive, rugged and easily transportable. The MVP15 offers a robust internal crossover with Dyna-Tech Dynamic HF Driver Protection. The crossover is built to last with high quality inductors, precision wound coils and military grade circuit boards. The proprietary Thermal Link Dynamic HF Driver Protection circuit provides both over-current and thermal protection for added performance and reliability. Designed as a stand-alone full-range loudspeaker system, the MVP15 offers enough bass for most applications. Mounting is easily accomplished utilizing the threaded inserts provided and optional mounting kits.
Features
-
Signal present led
-
Thermal link HF driver protection
-
HF20 low mass ferrofluid-cooled non-metallic diaphragm
-
Heavily braced mdf construction
-
Two ¼" input connectors, and two locking connectors
-
Recessed handles
-
16 gauge steel grilles ·mounting/rigging points (must use strapkit)
-
Mid-range contour switch
-
Exclusive Dyna-Tech circuitry provides repeatable protection by converting excessive current into heat and light, reducing excessive power to the driver.
-
New multi-layer, parallel wound voice coil for improved physical strength and better power handling capabilities.
-
Re-designed crossovers for increased output and improved overall tonal balance.
-
All crossovers feature new voltage sensing circuitry for added protection.
-
New midrange contour switch allows for improved speech intelligibility when the boost is switched on.
-
New quick-connect wiring harness for crossovers.
Specifications
Loudspeaker Type: Two-way, full-range
Operating Range:
65 Hz - 16 kHz
70 Hz - 14 kHz (+/-6dB)
Max Input Ratings:
200W continuous, 500W Program
40 volts RMS, 89 volts momentary peak
Recommended Power Amplifier:
For maximum SPL: 400W to 600W @ 8 Ohms
Sensitivity 1W/1m:
95 dB SPL (50 Hz - 12.5 kHz 1/3 octave bands)
94 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output: 118 dB SPL / 125 dB SPL (peak)
Nominal Impedance: 8 Ohms
Min Impedance: 3.9 Ohms @ 10830 Hz
Nominal -6dB Beamwidth:
90° H (+2° / -46°, 1 kHz - 12.5 kHz)
40° V (+58° / -14°, 1 kHz - 12.5 kHz)
Axial Q / DI: 14.6 / 11.6, 1 kHz - 12.5 kHz
Crossover Frequency: 2 kHz
Recommended Signal Processing: 65Hz high pass filter
Drivers:
LF (1) 15"
HF (1) HF20 compression driver, non-metallic diaphragm, Ferrofluid-cooled
Driver Protection: Dyna-Tech
Input Connection: (2) 1/4” jacks, (2) Locking Connectors
Controls: Mid-Range Boost Switch
Enclosure: MDF
Enclosure Hardware:
(2) Recessed handles
(8) Interlocking corner protectors
(4) Rubber feet
Mounting / Rigging Provisions:
(1) 1-3/8” stand socket
(6) 5/16-18 hanging point inserts
Grille: 16 gauge perforated steel
Required Accessories: None
Supplied Accessories: None
Optional Accessories:
Strapkit: (3) steel straps for suspending
WB1: (2) steel plate brackets for wall mounting
Dimensions:
Height: 23.8” / 606.5 mm
Width (front): 17.5” / 445 mm
Width (rear): 13.1” / 333 mm
Depth: 15” / 380 mm
Weight: 46 lb. / 21 kg
Shipping Weight: 55 lb. / 24.9 kg
|
Sign In
