SHOP BY BRAND

Community MVP-15M 15" 500 Watt 2 Way Floor Monitor    Then new MVP Series II loudspeakers combines the high-output intensity of raw acoustic power with unrivaled sonic clarity, the product group brings professional-quality sound reinforcement to DJs, bands, and anyone else demanding the best in audio. All full-range systems utilize Community’s proprietary HF20 High Frequency Compression Driver featuring a ferrofluid cooled non-metallic diaphragm to insure smooth performance and extremely low distortion. Community's Dyna-Tech Driver Protection System safeguards all MVP Series II models. With Dyna-Tech your speaker can operate at its full dynamic range and still react quickly to excessive musical transient peaks without worry of damaging the speaker. It also means your speaker is protected from the instant the power amplifier is plugged into it and/or turned on. Dyna-Tech illuminates a red indicator light found on the input panel of all models. The MVP15M is a high output, super-compact, two-way stage monitor system. The system utilizes one HF20 proprietary high-frequency compression driver coupled to an exponential horn and one 15" woofer for high sensitivity and excellent power handling capability. These components are matched to an extremely low-profile enclosure of an optimally tuned, direct radiating, bass reflex design. The recessed handles, black carpet exterior, perforated steel grille, and injection molded corners make this system attractive, rugged and easily transportable. The MVP15M offers a robust internal crossover with Dyna-Tech Dynamic HF Driver Protection.  The crossover is built to last with high quality inductors, precision wound coils and military grade circuit boards. The proprietary Dyna-Tech Dynamic HF Driver Protection circuit provides both over-current and thermal protection for added performance and reliability. Designed as a high performance stage monitor, the MVP15M offers the clarity and detail necessary for critical live performance use. In addition, its smooth, peak-free response provides maximum gain before feedback ensuring capability for high on-stage sound pressure levels. The compact, low-profile design makes the MVP15M ideal for TV broadcast, house of worship and other applications where stage equipment must be as unobtrusive as possible, yet provide fully professional performance.   Features Signal present LED Thermal link HF driver protection HF20 low mass ferrofluid-cooled non-metallic diaphragm Heavily braced MDF construction Two ¼" input connectors, and two locking connectors Recessed handles 16 gauge steel grilles Mounting/rigging points (must use strapkit) Mid-range contour switch  Exclusive Dyna-Tech™ circuitry provides repeatable protection by converting excessive current into heat and light, reducing excessive power to the driver. New multi-layer, parallel wound voice coil for improved physical strength and better power handling capabilities. Re-designed crossovers for increased output and improved overall tonal balance. All crossovers feature new voltage sensing circuitry for added protection. New midrange contour switch allows for improved speech intelligibility when the boost is switched on. New quick-connect wiring harness for crossovers.   Specifications   Loudspeaker Type: Two-way, full-range Operating Range: 70 Hz - 16 kHz 80 Hz - 14 kHz (+/-5dB) Max Input Ratings: 200W continuous, 500W Program 40 volts RMS, 89 volts momentary peak Recommended Power Amplifier: For maximum SPL: 400W to 600W @ 8 Ohms Sensitivity 1W/1m: 94 dB SPL (63 Hz - 12.5 kHz 1/3 octave bands) 93 dB SPL (250 Hz - 4 kHz speech range) Maximum Output: 117 dB SPL / 124 dB SPL (peak) Nominal Impedance: 8 Ohms Min Impedance: 3.9 Ohms @ 10720 Hz Nominal -6dB Beamwidth: 90° H (-4° / -47°, 1 kHz - 12.5 kHz) 40° V (+34° / -19°, 1 kHz - 12.5 kHz) Axial Q / DI: 14.9 / 11.7, 1 kHz - 12.5 kHz Crossover Frequency: 2 kHz Recommended Signal Processing: 70Hz high pass filter Drivers: LF (1) 15" HF (1) HF20 compression driver non-metallic diaphragm, Ferrofluid-cooled Driver Protection: Dyna-Tech Input Connection: (2) 1/4” jacks, (2) Locking Connectors Controls: Mid-Range Boost Switch Enclosure: MDF Enclosure Hardware: (2) Recessed handles (6) Interlocking corner protectors (4) Rubber feet Mounting / Rigging Provisions: None Grille: 16 gauge perforated steel Required Accessories: None Supplied Accessories: None Optional Accessories: None Dimensions: Height: 23.4” / 594 mm Width: 17.5” / 445 mm Depth: 15” / 380 mm Front slope: 35º from horizontal Weight: 41 lb. / 18.5 kg Shipping Weight: 45 lb. / 20.4 kg

E-mail a friend about this item.

RETURN TO SEARCH RESULTS LIST