| Community MVP-18S
18" 600 Watt 2 Way Subwoofer System
Then new MVP Series II loudspeakers combines the high-output intensity of raw acoustic power with unrivaled sonic clarity, the product group brings professional-quality sound reinforcement to DJs, bands, and anyone else demanding the best in audio.
All full-range systems utilize Community’s proprietary HF20 High Frequency Compression Driver featuring a ferrofluid cooled non-metallic diaphragm to insure smooth performance and extremely low distortion. Community's Dyna-Tech Driver Protection System safeguards all MVP Series II models. With Dyna-Tech your speaker can operate at its full dynamic range and still react quickly to excessive musical transient peaks without worry of damaging the speaker. It also means your speaker is protected from the instant the power amplifier is plugged into it and/or turned on. Dyna-Tech illuminates a red indicator light found on the input panel of all models.
The MVP18S is a rugged, high-sensitivity, subwoofer system. The system utilizes one 18" woofer for solid bass and excellent power handling capability. This transducer is matched to an optimally tuned direct-radiating bass-reflex enclosure. The system is specifically designed for easy pole mounting of MVP full-range systems with an integral 1 3/8" diameter stand socket on top. The recessed handles, black carpeted exterior and injection molded corners also make this system attractive and rugged. The MVP18S offers a unique 150 Hz high-pass crossover output that makes it easy to add to existing full- range systems without additional amplifiers and electronic crossovers. This product should never be suspended by its handles.
Features
-
Die Cast Zinc Stand Socket
-
22" Mounting Pole Included
-
Built-In High Pass Filter @ 150 Hz
-
Heavily Braced MDF Construction
-
¼" Input Connector And 2 Locking Connectors
-
Recessed Handles
-
16 Gauge Steel Grilles
-
Mounting/Rigging Points (Must Use Strapkit)
-
Exclusive Dyna-Tech™ circuitry provides repeatable protection by converting excessive current into heat and light, reducing excessive power to the driver.
-
New multi-layer, parallel wound voice coil for improved physical strength and better power handling capabilities.
-
Re-designed crossovers for increased output and improved overall tonal balance.
-
All crossovers feature new voltage sensing circuitry for added protection.
-
New midrange contour switch allows for improved speech intelligibility when the boost is switched on.
-
New quick-connect wiring harness for crossovers.
Specifications
Loudspeaker Type: Subwoofer
Operating Range:
40 Hz - 250 Hz
60 Hz - 150 Hz (+/-3dB)
Max Input Ratings:
300W continuous, 750W program 49 volts RMS, 110 volts momentary peak
Recommended Power Amplifier:
For maximum SPL: 600W to 900W @ 8 Ohms
Sensitivity 1W/1m: 98 dB SPL (50 Hz - 160 Hz 1/3 octave bands)
Maximum Output: 123 dB SPL / 130 dB SPL (peak)
Nominal Impedance: 8 Ohms
Min Impedance: 6.4 Ohms @ 40 Hz
Nominal -6dB Beamwidth: 360° H x 360° V
Axial Q / DI: 1 / 0, 40 Hz - 150 Hz
Recommended Signal Processing:
100 Hz - 150 Hz electronic crossover
40 Hz High pass filter
Drivers: LF (1) 18"
Driver Protection: None
Input Connection:
(1) 1/4" jack
(2) Locking Connectors
Output Connection: (1) 1/4" 150 Hz highpass
Controls: None
Enclosure: MDF
Enclosure Hardware:
(2) Recessed handles
(8) Interlocking corner protectors
(4) Rubber feet
Mounting / Rigging Provisions:
(1) 1 3/8" top mount pole socket
Grille: 16 gauge perforated steel
Required Accessories: None
Supplied Accessories:
(1) 33.5" (851mm) mounting pole 1 3/8" diameter pole,
Optional Accessories: digital speaker controller
Dimensions:
Height: 34.3” / 873.2 mm
Width: 18” / 457 mm
Depth: 19.2” / 489 mm
Weight: 89 lb. / 40.4 kg
Shipping Weight: 96 lb. / 43.5 kg
|
Sign In
