| SAMSON dB300A
300 Watt 2 Way Active Loudspeaker
*B-STOCK UNIT, with 1 Year Manufacturer's Warranty!
*B-Stock units are pieces that were returned to the manufacturer by a dealer or customer for one reason or another. Typically a blown speaker, bad wiring, or minor cosmetic damage. The units are repaired to working order and sold as B-Stock. These B-Stock units carry the same 1 yr manufacturer's warranty as new units.
*Picture shown is stock photo, not the actual unit you will receive.
Description
Ideal for houses of worship and other smaller public address applications, the Samson dB300a two-way, portable active loudspeaker system delivers bi-amped, high-efficiency, 300 Watts RMS of power. The dB300a features a balanced microphone and line level inputs, XLR output and two band EQ.
The dB300a's rugged speaker cabinet is molded from high-impact polypropylene, and like its larger cousin, the dB500a, features an array of mounting options. Designed with versatility in mind, it can be easily stacked or permanently installed. The design of the dB300a also makes it usable as 30 or 45 degree floor monitors as well.
The dB300a speaker system by Samson takes the concept of powered PA systems to a new level. By combining 300 watts of super clean power, advanced active processing and the highest quality speaker and cabinet components, the dB300a provides studio quality sound for any kind of live sound reinforcement application. The loudspeaker features a super heavy-duty, custom designed, 12-inch low frequency driver and a 1.75 inch titanium diaphragm high frequency driver on a 1" throat, wide dispersion horn. The dB300a offers crystal-clear audio and an ultra-wide sound field. The top end is clear, sweet and articulate. The low-end is enormous. The dB300a is powered by a Class H amplifier that pumps 250 Watts to the low frequency driver and a Class AB amp that provides 50 Watts to the high frequency section—more than enough power to fill any large club. The efficient Class H amplifier design provides the power to deliver transient spikes with incredible punch and sonic purity.
The dB300a goes beyond concert-quality to studio-quality thanks to Samson’s exclusive Optimax processing. Optimax processing uses sophisticated circuitry to compress and limit output at ideal levels. This allows the dB300a to provide huge volume levels without sacrificing low end. The dB300a offers a practical back-panel, mixer-like preamp section that provides mic and line inputs with individual input level controls. Controls for the selectable low pass filter and extension output selection are also included. The trapezoidal shape of the speaker cabinet offers more than just superior acoustics, not only is it a front-firing PA speaker, the dB300a’s are also designed to operate as wedge-style monitors. Adding to the dB300a’s practical design is a catalog of mounting options.
With the dB300a, setup and break down is quick and easy. The compact cabinet can be easily stacked, using the built-in stacking bumpers or stand mounted using the integral 1 3/8" pole mount receptacle. For permanent installations, the enclosures can be fixed to a wall or ceiling using the optional MB300U U-bracket mounting kit. The dB300a can also be suspended using the four built-in fly points and fixed in arrays using the MB300A array kit. If you are traveling to different venues with your loudspeaker system, the heavy-grade steel grill, scuff-resistant textured finish and rigid corners offer excellent protection against wear and tear on the road. As fixed sound reinforcement or as a durable, great-sounding road PA, the dB300a active monitor is ideal for sound professionals and performers looking for serious power and studio monitor sound quality from a PA speaker system.
Features
-
Two-way Active Loudspeaker
-
Custom designed, heavy-duty, 12-inch low frequency driver with 3-inch voice coil.
-
1" throat, high-frequency compression driver with 1.75-inch titanium diaphragm.
-
Efficient 250 watt, Class H power amplifier for low frequency transducer with High Speed, High Current MOSFET rail switches.
-
50 watt class AB amplifier for high frequency compression driver.
-
Massive torroidal power transformer.
-
Balanced line level input with level control.
-
Balanced microphone input with level control and Phantom Power for condenser microphones.
-
Sophisticated, multi-band dynamics processor with audibly transparent limiting.
-
Internal 24 dB/octave time aligned electronic crossover.
-
Separate bass and treble controls.
-
Defeatable low cut filter.
-
30 and 45- degree monitor angles for near and far field coverage.
-
Standard 1 3/8-inch (35mm) speaker stand receptacle.
-
Four M6 fly-points for hanging installations.
-
Optional U bracket and Array kits for wall mounting or hanging clusters.
-
Rugged, road-worthy construction for high reliability.
-
Multi-point amplifier protection for all fault conditions.
-
Quality build and rugged construction ensure reliable performance from venue to venue.
Specifications
Inputs
Microphone Balanced XLR
Line Balanced Combo XLR/Line
Outputs
Extension Balanced XLR
Controls
Mic Level Rotary
Line Level Rotary
Low EQ Rotary Center Detent, +/-12dB @100Hz
High-EQ Rotary Center Detent, +/-12dB @ 10kHz
Low Filter Switch Push Switch, High Pass (low-cut) 12dB per octave @80Hz
Output Switch Push Switch, Selects Mix or Thru for Line Output Connector
Power Rating:
Low Frequency 250 Watt RMS
High Frequency 50 Watt RMS
Frequency Response: 60 Hz – 24 kHz ± 3 dB
Crossover Frequency: 2.3 kHz, 3 pole (18 dB Per Octave)
LF Driver: 12" heavy-duty bass transducer, 3" voice coil (Kapton Former), 50 oz. barium ferrite magnet
HF Driver: 1.75" titanium compression driver, edge-wound copper voice coil, 64 oz. magnet structure
Mounting:
Stand Integral 1 3/8" Pole Mount Receptacle,
Fly Points 4
Stacking Large, gender mating stacking bumpers
Weight: 47lbs. (21.4 kg)
Dimensions: 24" (h) x 16" (w) x14" (d) 610mm (h) x 407mm (w) x 356mm (d)
|
Sign In
