| Electro Voice PL-DK7
PL Series 7 Piece Drum Microphone Pack
The PL DK7 is a ready-for-the-gig microphone solution for a five-piece drum kit containing one PL33 kick drum mic, four PL35 tom/snare mics, and two PL37 condenser overhead/hi-hat mics. The PL DK7 is packaged in a high-quality, firm-exterior 600 Denier nylon gig bag with shoulder strap.
PL33
Designed for kick drum, low toms and low frequency instruments, the PL33 delivers all the tight punch, transient snap, and natural acoustic properties necessary for today’s demanding sound requirements. With enhanced isolation via a tight supercardioid polar pattern, coupled with application-oriented frequency response voicing, the PL33 excels in performance and value. Although the PL line is designed for professional live sound applications, the PL33 (along with all PL drum mics) is equally capable of handling the sonic requirements of recording studio applications.
PL35
This product is a professional-grade supercardioid dynamic microphone designed to deliver the power, punctuation and natural tones of toms and snare drums in any size sound reinforcement system or recording studio. With its frequency response designed for that special tonal area toms and snare drums occupy, the PL35 delivers all of the "dialed-in" tone and percussive impact detail professional drummers and sound system engineers require. The PL35’s tight supercardioid polar pattern is designed to minimize off-axis information from nearby drums and instruments entering the capsule, and allows for a very isolated instrument sound and higher gain before feedback.
Cable clutter and positioning in tight spaces can always be an issue when miking toms and snares, and the PL35’s clever cable exit angle of 37.5° relative to the body reduces the vertical space above the drum required for the XLR connector and cable. The PL35 is supplied with the unique DRC-1 drum rim clamp which eliminates the need for a floor stand and boom, and allows easy-on / easy-off attachment of the microphone to virtually any drum brand steel rim.
PL37
Thank you for purchasing the Electro-Voice® PL37. This product is a professional-grade tight cardioid condenser microphone designed to deliver all of the crisp detail of cymbals, high-hats and percussion instruments in any size sound reinforcement system or recording studio. With its frequency response designed for overhead drum set and percussion miking, the PL37 delivers all of the "dialed-in" tone and percussive transient response detail professional drummers and sound system engineers require.
The PL37’s tight cardioid polar pattern is designed to minimize off-axis information from nearby stage instruments entering the capsule, and allows for a clean drum set sound and higher gain before feedback. Although designed to be an overhead drum set and percussion microphone, the PL37 can also be used as an acoustic instrument microphone in applications where a condenser element capsule would be desired.
Features
- 1 PL 33 kick drum mic
- 4 PL35 tom/snare mics
- 2 PL37 condenser overhead/hi-hat mics
- Rugged gig bag for storage and transport
Specifications
PL37
Element Type: Self-Biased Condenser
Frequency Response: 50 Hz - 16,000 Hz
Polar Pattern: Cardioid
Sensitivity, Open Circuit Voltage, 1 kHz: 7.0 mV/Pa (-43 dBV)
Polarity:
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Rated Impedance: 200 ohms
Max SPL (1% THD @1 kHz): 132 dB SPL
Self Noise: 25 dB SPL, A-weighted
Dynamic Range: 107 dB
Signal-to-Noise Ratio: 69 dB (@94 dB SPL)
Phantom Supply Requirement: 11 to 52 VDC, 4 mA
Microphone Connector: 3-pin, XLR-type
Finish: Textured black satin body with MemraflexTM grille
Dimensions:
Length = 6.40" (162.5 mm) Width = 1.14" (29.0 mm) Shank = 0.83" (21.1 mm)
Accessories Included:
Stand adapter with Euro-thread insert, Soft zippered gig bag
Net Weight: 6.3 oz (176 g)
Shipping Weight: 17.1 oz (485 g)
|
Sign In
