| Peavey PR 15D
15", 200 Watt 2-Way Powered Speaker
The Peavey PR 15D is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PR 15D is capable of up to 120 dB peak SPL. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system.
This two-way powered system is comprised of a 150 W class D power amplifier driving a 15" heavy duty woofer. The RX™14 compression driver is driven by a 50 W class D power amplifier and features a 1.4” titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90˚ by 40˚) that is molded integrally into the enclosure.
A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4”TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4”phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input.
A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely.
The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature the patented DDT™compression, which virtually eliminates audible power amplifier clipping.
A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount™allow maximum utility.
Features
- Bi-amplified Class D powered system with 200 watt total power
- Both power amps have DDT compression
- 15" heavy duty woofer with 2.375" voice coil and Neodymium Magnet
- Woofer servo for reduced woofer distortion
- Automatic equal loudness (Fletcher-Munson)
- RX 14 1.4" titanium compression driver
- Peak SPL up to 120 dB with music!
- Combo jack with 1/4" TRS & female XLR mic- or line-level balanced input
- Two 1/4" phone jacks for link-out/direct-in capability
- Molded-in horn with exceptionally smooth response and pattern control
- Top and sides handgrips
- Pole mount molded-in
- Reduced weight
- Top and bottom flying point inserts
- Packed Weight: 19.4lbs.
- Packed Dimensions (WxHxD): 24.25" x 19" x 30.25"
Specifications
Frequency Response: 47 Hz to 20 kHz
Low Frequency Limit (-3 dB point): 36 Hz
Useable Low Frequency Limit (-10 dB point): 42 Hz
Internal Power Amplifiers (@120 VAC line):
Woofer - 150 Watts @ less than 0.1% distortion
Tweeter - 70 Watts peak dynamic power 50 Watts @ less than 0.1% distortion.
Nominal Sensitivity (1W @1M, swept sine input in anechoic environment): 97 dB
Maximum Sound Pressure Level: 120 dB music peak
Nominal Radiation Angles: 90˚ horizontal by 40˚ vertical
Transducer Complement: 15" heavy duty woofer and RX™14 1.4" titanium diaphragm compression driver tweeter
Box Tuning Frequency (Fbox): 55 Hz Electroacoustic Crossover
Frequency: 2,000 Hz
Crossover Type: Internal Electronic two-way crossover with CD horn EQ, level matching, bass boost and subsonic filtering.
Crossover Slopes:
18 dB/octave (third order) low pass, 18 dB/octave (third order) high pass, both with staggered poles and driver EQ. Unit has horn spatially aligned with woofer.
Electronic Input Impedance (Nominal): 10 k ohms unbalanced, 20 k ohms balanced line level, 2.4 k ohms balanced mic level.
Input Connections:
One combo female XLR/ 1/4" phone jack providing balanced operation, with switch selectable mic or line level sensitivity. Also has two 1/4" phone jack line level unbalanced input and output.
Enclosure Materials and Finish:
Injection-molded polypropylene of a nominal thickness of 1/4" with internal ribbing and bracing, and with textured finish. Molded material is black.
Mounting:
Subwoofer pole-mounting via molded in mount, flying via Versamount™ 70 and four rubber feet for floor use.
Dimensions:
28.56" (72.5 cm) tall by 21.31"
(54.1 cm) wide {11.50"/29.2 cm in rear} by 17.00" (43.2 cm) deep
Net Weight: 37 lbs.
ELECTRONICS AND AMPLIFIER
SPECIFICATIONS:
Electronic Input Impedance (Nominal):
Primary balanced input: 20 k ohms line level sensitivity selected, 2.4 k ohms mic level sensitivity selected, 10 k ohms unbalanced 1/4".
Mic Switch Sensitivity Increase: 30 dB
Infrasonic filter protection: 36 dB/octave roll-off Woofer servo that subtracts error so that the woofer cone follows the drive waveform precisely.
Constant Loudness (Fletcher-Muson) circuit for accentuating bass and treble at low listening volume levels.
Nominal Amplifier Frequency Response: +0, -1 dB from 10 Hz to 30 kHz
Hum and Noise: Greater than 90 dB below rated power
DDT Dynamic Range: Greater than 14 dB
THD and IM: Typically less than 0.1 %
Damping Factor: Greater than 100 @ 1000 Hz, 8 ohms
Power requirements of Peavey PR™15D System (domestic): Nominal 110 watts, 120 VAC, 60 Hz
|
Sign In
