SHOP BY BRAND

Shure PGXD14/BETA98H Wireless System for Wind Instruments (PGXD4 Wireless Receiver, PGXD1 Bodypack Transmitter, WB98H/C Instrument Mic)     Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state-of-the-art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation. PGXD4 The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap. PGXD1 Powerful yet compact, the PGXD1 transmits wireless audio from instrument or microphone sources with pure digital clarity and rock-solid reliability. WB98H/C The Shure WB98H/C (the wireless version of the Beta 98H/C) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.     Includes PGXD4 Wireless Receiver PGXD1 Bodypack Transmitter WB98H/C Instrument Microphone     Features PGXD4 24-bit / 48kHz digital technology for incredibly accurate sound Automatic frequency selection locates a clear channel instantly One-touch sync automatically syncs the transmitter and receiver True digital diversity for rock-solid wireless signal reliability Up to 5 compatible channels per frequency band 1/4" and XLR audio outputs Included padded carrying case for portability and protection   PGXD1 Rugged, compact bodypack with belt clip 20 Hz – 20 kHz frequency range captures every nuance of tone Power, mute, and battery status LED 200 ft (60 m) operating range Up to 10 hours of continuous use from 2 AA batteries Recessed dial on side provides 26 dB of continuously adjustable gain Lockable interface prevents accidental setting change   WB98H/C The WB98H/C features transformerless preamplifier circuitry, which improves linearity across the full frequency range. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments. Tailored frequency response for studio quality performance Wide dynamic range for use in high SPL environments Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound Optional A98D drum mount is unobtrusive and versatile--allows precise positioning of the microphone while holding it firmly in place Compact design reduces stage clutter Detachable cable for easy storage Interchangeable microphone cartridges with different polar patterns are available Legendary Shure quality, ruggedness, and reliability       Specifications PGXD4:   Dimensions 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.) Weight 289 g (10.2 oz.) Housing ABS Audio Output Level (ref. ± 38 kHz deviation, 1 kHz tone) XLR connector (into 3000 ohms load): -2.5 dBV 1/4 inch connector (into 10000 ohms load): +10 dBV Impedance XLR: 50 ohms 1/4 inch: 50 ohms Sensitivity -102 dBm @ 10-5 BER Image Rejection > 70 dB, typical XLR Output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Audio LED Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply Pin Assignments XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4") TRS: Tip=audio, Ring=no audio,Sleeve=ground   PGXD1:   Audio Input Level +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain setting Gain Adjustment Range 26 dB Input Impedance 1 M ohms RF Output Level 10 mW maximum (dependent on applicable country regulations) Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.) Weight 128 grams (4.5 oz.) without batteries Housing Molded polycarbonate case Power Requirements 2 AA batteries Battery Life Up to 10 hours   WB98H/C:   Type Condenser (electret bias)   Frequency Response 20 to 20,000 Hz (measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions)   Polar Pattern Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.   Output Level (at 1,000 Hz) Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical *1 Pa = 94 dB SPL   Maximum SPL (20 Hz to 20 kHz, less than 1% THD) 2.5 kilohm load: 160 dB 1 kilohm load: 156 dB   Preamplifier Output Clipping Level (20 Hz to 20 kHz, less than 1% THD) 2.5 kilohm load: + 6 dBV (2.0 V) 1 kilohm load: + 2 dBV (1.26 V)   Dynamic Range (at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load) 125 dB (max SPL minus A-weighted noise)   Output Noise 35 dB SPL, A-weighted Signal-to-Noise Ratio 59 dB re 94 dB SPL   Output Impedance Rated at 150 ohms (actual) Recommended minimum load impedance: 1 kilohm   Hum Pickup -7.5 dB equivalent SPL in 1 mOe field (60Hz)   Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3   Phantom Power 48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3.   Cable BETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors. BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors.   Case Microphone: Matte black enamel brass case and stainless steel inner grille Preamplifier: Matte black enamel finished steel   Dimensions Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.) Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.)   Net Weight Microphone: 12 g (0.4 oz) less cable Preamplifier: 96 g (3.4 oz)

E-mail a friend about this item.

RETURN TO SEARCH RESULTS LIST