SHOP BY BRAND

Shure PGXD14/93 Wireless Lavalier Microphone System (PGXD4 Wireless Receiver, PGXD1 Bodypack Transmitter, WL93 Condenser Lavalier Mic)     Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state-of-the-art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation. PGXD4 The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap. PGXD1 Powerful yet compact, the PGXD1 transmits wireless audio from instrument or microphone sources with pure digital clarity and rock-solid reliability. WL93 Model WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a visually unobtrusive microphone is desirable. All WL93 models are supplied with a mounting block with attached tie bar, a sew-on mounting bracket, and an acoustic windscreen to minimize wind noise in outdoor applications. All WL93 models include a cable terminated with a 4-pin mini connector which connects directly to a Shure wireless body-pack transmitter.     Includes PGXD4 Wireless Receiver PGXD1 Bodypack Transmitter WL93 Lavalier Microphone     Features PGXD4 24-bit / 48kHz digital technology for incredibly accurate sound Automatic frequency selection locates a clear channel instantly One-touch sync automatically syncs the transmitter and receiver True digital diversity for rock-solid wireless signal reliability Up to 5 compatible channels per frequency band 1/4" and XLR audio outputs Included padded carrying case for portability and protection   PGXD1 Rugged, compact bodypack with belt clip 20 Hz – 20 kHz frequency range captures every nuance of tone Power, mute, and battery status LED 200 ft (60 m) operating range Up to 10 hours of continuous use from 2 AA batteries Recessed dial on side provides 26 dB of continuously adjustable gain Lockable interface prevents accidental setting change   WL93 Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement Small, inconspicuous mounting hardware Full, clear sound comparable to larger microphones Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation Controlled low-frequency rolloff reduces low-frequency clothing and room noise Low distortion, wide dynamic range Uniform omnidirectional polar pattern Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband Wide-range phantom powering (SM93) accepts all commonly used voltages         Specifications PGXD4:   Dimensions 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.) Weight 289 g (10.2 oz.) Housing ABS Audio Output Level (ref. ± 38 kHz deviation, 1 kHz tone) XLR connector (into 3000 ohms load): -2.5 dBV 1/4 inch connector (into 10000 ohms load): +10 dBV Impedance XLR: 50 ohms 1/4 inch: 50 ohms Sensitivity -102 dBm @ 10-5 BER Image Rejection > 70 dB, typical XLR Output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Audio LED Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply Pin Assignments XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4") TRS: Tip=audio, Ring=no audio,Sleeve=ground   PGXD1:   Audio Input Level +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain setting Gain Adjustment Range 26 dB Input Impedance 1 M ohms RF Output Level 10 mW maximum (dependent on applicable country regulations) Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.) Weight 128 grams (4.5 oz.) without batteries Housing Molded polycarbonate case Power Requirements 2 AA batteries Battery Life Up to 10 hours   WL93:   Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz   Polar Pattern Omnidirectional, uniform with frequency Output Impedance 3000 ohms Output Level (1 Pascal = 94 dB SPL) Open Circuit Voltage: -38 dBV/Pa (13 mV) Output Clipping Level (at 1,000 Hz) 0.25 V at 120 dB Total Harmonic Distortion Less than 1% at 120 dB Maximum SPL 120 dB Dynamic Range (maximum SPL to A-weighted noise level) 102 dB Output Noise (equivalent SPL) 18 dB typical, A-weighted Signal-to-Noise Ratio 76 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)* *Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector Recommended Operating Voltage 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4) Current Drain 40 microA typical Environmental Conditions Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) Cable Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft]) Case Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille Net Weight Microphone: 16 g (0.57 oz)

E-mail a friend about this item.

RETURN TO SEARCH RESULTS LIST