SHOP BY BRAND

Shure PGXD14/PG30 Wireless Headworn Microphone System (PGXD4 Wireless Receiver, PGXD1 Bodypack Transmitter, PG30 Headset Mic)     Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state-of-the-art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation. PGXD4 The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap. PGXD1 Powerful yet compact, the PGXD1 transmits wireless audio from instrument or microphone sources with pure digital clarity and rock-solid reliability. PG30 Headset Condenser Microphone for use with Shure Performance Gear and PGX Wireless Systems.     Includes PGXD4 Wireless Receiver PGXD1 Bodypack Transmitter PG30 Headset Microphone     Features PGXD4 24-bit / 48kHz digital technology for incredibly accurate sound Automatic frequency selection locates a clear channel instantly One-touch sync automatically syncs the transmitter and receiver True digital diversity for rock-solid wireless signal reliability Up to 5 compatible channels per frequency band 1/4" and XLR audio outputs Included padded carrying case for portability and protection   PGXD1 Rugged, compact bodypack with belt clip 20 Hz – 20 kHz frequency range captures every nuance of tone Power, mute, and battery status LED 200 ft (60 m) operating range Up to 10 hours of continuous use from 2 AA batteries Recessed dial on side provides 26 dB of continuously adjustable gain Lockable interface prevents accidental setting change   PG30 Comfortable wireframe for secure fit Smooth, natural frequency response comparable to quality handheld microphones Reliable at temperature and humidity extremes          Specifications PGXD4:   Dimensions 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.) Weight 289 g (10.2 oz.) Housing ABS Audio Output Level (ref. ± 38 kHz deviation, 1 kHz tone) XLR connector (into 3000 ohms load): -2.5 dBV 1/4 inch connector (into 10000 ohms load): +10 dBV Impedance XLR: 50 ohms 1/4 inch: 50 ohms Sensitivity -102 dBm @ 10-5 BER Image Rejection > 70 dB, typical XLR Output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Audio LED Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply Pin Assignments XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4") TRS: Tip=audio, Ring=no audio,Sleeve=ground   PGXD1:   Audio Input Level +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain setting Gain Adjustment Range 26 dB Input Impedance 1 M ohms RF Output Level 10 mW maximum (dependent on applicable country regulations) Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.) Weight 128 grams (4.5 oz.) without batteries Housing Molded polycarbonate case Power Requirements 2 AA batteries Battery Life Up to 10 hours

E-mail a friend about this item.

RETURN TO SEARCH RESULTS LIST