SHOP BY BRAND

Shure PGXD24/BETA58 Wireless Handheld Microphone System (PGXD4 Wireless Receiver, PGXD2 Handheld Transmitter, Beta 58A Handheld Mic)     Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state-of-the-art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation. PGXD4 The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap. PGXD2 Compatible with Shure microphones trusted by musicians for decades, including the legendary SM58, the PGXD2 transmits wireless audio with pure digital clarity and rock-solid reliability. Beta 58A The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.  The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.      Includes PGXD4 Wireless Receiver PGXD2 Bodypack Transmitter Beta 58A Handheld Mic     Features PGXD4 24-bit / 48kHz digital technology for incredibly accurate sound Automatic frequency selection locates a clear channel instantly One-touch sync automatically syncs the transmitter and receiver True digital diversity for rock-solid wireless signal reliability Up to 5 compatible channels per frequency band 1/4" and XLR audio outputs Included padded carrying case for portability and protection   PGXD2 Power, mute, and battery status LED Up to 9 hours of continuous use from 2 AA batteries 200 ft (60 m) operating range 10 dB of adjustable gain Lockable interface prevents accidental setting changes Rugged construction for reliable performance show after show   Beta 58A Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound Neodymium magnet for high signal–to–noise output Hardened steel mesh grille that resists wear and abuse Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration Minimally effected by varying load impedance Legendary Shure quality and reliability   Specifications PGXD4:   Dimensions 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.) Weight 289 g (10.2 oz.) Housing ABS Audio Output Level (ref. ± 38 kHz deviation, 1 kHz tone) XLR connector (into 3000 ohms load): -2.5 dBV 1/4 inch connector (into 10000 ohms load): +10 dBV Impedance XLR: 50 ohms 1/4 inch: 50 ohms Sensitivity -102 dBm @ 10-5 BER Image Rejection > 70 dB, typical XLR Output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Audio LED Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply Pin Assignments XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4") TRS: Tip=audio, Ring=no audio,Sleeve=ground   PGXD2:   Audio Input Level +5 dBV maximum at -10 dB gain position –5 dBV maximum at 0 dB gain position Gain Adjustment Range 10 dB RF Output Level 10 mW maximum (dependent on applicable country regulations) Housing Molded PC/ABS handle and battery cup Dimensions (including SM58 cartridge) 254 mm x 51 mm dia. (10 x 2 in.) Weight 290 grams (10.2 oz.) without batteries Power 2 AA size batteries Battery Life Up to 9 hours   Beat 58A:   Type Dynamic (moving coil) Frequency Response 50 to 16,000 Hz   NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position. Polar Pattern Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level (at 1,000 Hz) Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL Impedance Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. Case Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille. Adjustable, Stand Adapter Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish. Dimensions See User Guide. Net Weight 278 grams (9.92 oz)

E-mail a friend about this item.

RETURN TO SEARCH RESULTS LIST