| SAMSON MDR6
6-CHANNEL MIXER
The MDR6 is a six channel mixer, with four low noise microphone pre-amps. The MDR6 also features HDM (Hard Disk Mode), which when engaged, provides a special monitoring and bussing mode ideal for interfacing with a computer based hard disk recorder. Clean, clear sound reproduction packaged in a rugged enclosure, ensure reliable high quality sound from performance to performance. Optimized for recording, live sound reinforcement and commercial installations, the MDR6 is an ideal mixer solution offering big sound in a compact package.
Features
-
Six channels – Two Mic/Line plus two Stereo inputs with mic pre’s.
-
Flexible design topology ideal for live sound, recording and post production.
-
Unique monitoring and bussing in HDM (HARD DISK MODE) provides a seamless interface with computer based, hard disk recording systems.
-
60 mm audio taper faders on all channels and the master Mix outputs.
-
2TK LEVEL control allows you to mix in a CD, DAT, Cassette, Computer Sound Card or Mini Disk.
-
Three-band channel equalizer, +/-15dB at 80Hz, 2.5 KHz and 12KHz provides precise and musical results in sound shaping.
-
An Auxiliary Send for external effects, on stage monitor mix, or headphone mixing.
-
Five segment LED Meter with VU ballistics displays the main MIX output.
-
High quality, low noise, discrete microphone pre-amplifiers with 48-Volt phantom power, provide Maximum
-
Dynamic Range and transparent audio.
-
Advanced circuit design using discrete components and high quality, low noise op-amps carefully selected at each stage of the signal path.
-
Quality built and rugged construction ensure reliable performance from venue to venue and session to session.
Specifications
Frequency Response (Trim @ Min, unity gain ± 3 dB)
Mic to Main: 5 Hz - 54 kHz
Line to Main: 5 Hz - 54 kHz
Aux Return to Main: 5 Hz - 98 kHz
Line to Aux Send: 5 Hz - 57 kHz
T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 kHz LPF)
Mic/Line to Main (Mono Ch): 0.0%
Line to Main (Stereo Ch): 0.02%
Line to Aux Send: 0.02%
Equivalent Input Noise ("A" filter on, input shorted)
Mic -128 dB
Line -104 dB
Maximum Voltage Gain
Mic to Main: 74 dB
Line to Main (Mono Ch): 56 dB
Line/Tape to Main (Stereo Ch): 34 dB
Aux Return to Main: 20 dB
Mic to Aux Send: 74 dB
Line to Aux Send (Stereo Ch): 34 dB
Residual Noise (30 kHz LPF, all control Min)
Main: -89 dBu
Aux Send: -86 dBu
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch: 75 dB
Input vs. Output: 87.5 dB
Peak LED Sensitivity (before clipping)
5 dB
CLIP Indicators
Turn on: THD> 0.1%
Headphone output (600 ohm load)
100 mW
Maximum Input Level (1 kHz, ± 3dB)
Mic Input (Mono"Ch): 10.5 dBu
Line Input (Stereo Ch): 7.6 dBu
Input Channel Equalizer (± 2dB)
High (shelving): 12 kHz ±15 dB
Mid (peaking): 2.5 kHz ± 15 dB
Low (shelving): 80 Hz ±15 dB
Meters
6 POINT LED METERS (-20, -12, -6, 0, +6dB and PEAK)
Phantom Power
+48V
Power Requirement
110V-240V, 50/60Hz
Power Consumption
19 watts
Dimensions
(W x D x H) 9" x 10 3/4" x 3 1/2"
(229mm) x (273 mm) x (89mm)
Weight
4.5 lbs. (2.1 kg)
* 1 Year Manufacturer's Warranty
|
Sign In
