SAMSON TXM20 TABLETOP 20 CHANNEL 500 WATT POWERED MIXER   The TXM20 is a twenty channel, powered mixer in an ergonomically correct, attractively appointed, tabletop enclosure. The TXM models feature the same massive 1000-watt power amplifier, which is capable of running in 2 x 500-watt stereo, 500-watt Main plus 500-watt monitor, or 1000-watt bridge mono operating modes. To set the overall tonal response of your mix, the TXM mixers feature a Nine-band Stereo Graphic Equalizer for the Main Left and Right outputs, plus a separate Nine-band Graphic Equalizer for your monitor mix. Connecting all your microphones and instruments is simple, with twelve mic/line inputs plus four additional stereo channels.  There are also dedicated stereo effects returns for the onboard digital effects. And the effects! The TXM20 employs two onboard 100 24-bit Multi-Effects Processors. It’s easy to dial up your favorite effects preset with the large seven-segment LED display. Plus, the TXM mixers have extensive auxiliary busses allowing you to have complex combinations of effects on all the channels, or two different effects on different groups of channels.  The auxiliary buses are also extremely flexible when it comes to monitor mixes. The TXM20 will give you clean, clear sound reproduction thanks to the high quality, low noise microphone preamps, super clean, low impedance mix bus, two on-board 9-band graphic equalizers and the high output/low distortion power amplifier. The units are easy to transport with their compact size and oversized, sure-grip handle.  The super-tough steel construction ensures reliable, high quality sound from venue-to-venue and performance-to-performance day in, and night out. Optimized for live sound reinforcement and commercial installations, the TXM20 is the ideal mixer and power amp solution that offers plenty of inputs, sweet sounding effects and big sound in a compact package. It features 12 high-quality microphone preamps with phantom power, channel inserts and low cut filters. 1/4-inch phone and Speakon® outputs. 3-band EQ pre channel, 4 Aux sends, and dual internal 24 bit effects processor with 100 preset programs. There is 1 stereo 9-band graphic EQ for the mains plus 1 mono 9-band graphic EQ for the monitors, and a mono sub output with variable low-pass filter. All of this plus a large metal carry handle make the TXM20 equally suited for gigging musicians or in fixed installations. Features 12 high-quality microphone preamps 500 watts stereo, 1000 watts bridged mono 4 Aux sends (1 pre, 1 pre/post, 2 effects) Dual 9-band graphic EQ Dual Internal 24 bit effects processor with 100 preset programs Mono sub output with variable low-pass filter 1/4-inch phone and Speakon® outputs   Specifications Rated Output power  2 X 500W at 4Ω @0.1% THD at 1KHz 1 X 1000W at 8Ω Bridged Frequency response  20Hz~20KHz+/-0.7dB@1W Output into 8Ω (AMP OUT) 20 Hz~20KHz+/-0.4@+4dB Output into 10kΩ (MAIN OUT, AUX OUT, AUX SEND, EFX OUT) Total Harmonic Distortion  Less than 0.06%@20Hz~20KHz, 75W output into4Ω (AMP OUT) Less than 0.1%@20 Hz~20KHz+14dB output into 10KΩ (MAIN OUT, AUX OUT, AUX SEND, EFX OUT) (Average,RS+150Ω)  HUM & Noise -124dB equivalent input noise (with 22Hz~22KHz BPF)  -100dB residual output noise (MAIN OUT, MONITOR OUT, EFX OUT) -70dB (MAIN OUT, AUX OUT) Master level control at maximum, all channel level control at minimum. -70dB (EFX OUT) Master level control at maximum, all channel level controls at minimum Maximum Voltage Gain  99dB CH IN (MIC) to AMP OUT 74dB CH IN (MIC) to MAIN OUT, MONITOR OUT 70dB CH IN (MIC) to AUX 2 OUT 52.2dB CH IN (MIC) to REC OUT 54dB CH IN (LINE) to MAIN OUT, MONITOR OUT 16dB AUX IN to MAIN OUT 24dB TAPE IN to MAIN OUT Crosstalk  1KHz 70dB adjacent input, 70dB input to output Input Channel Equalization Mono Channel  HIGH 12KHz shelving (+/- 15dB Maximum) MID variable 100 Hz to 8kHz peaking (+/- 15dB Maximum) LOW 80Hz shelving (+/- 15dB Maximum) Stereo Channel  HIGH 12KHz shelving (+/- 15dB Maximum) MID 2.5KHz peaking (+/- 15dB Maximum) LOW 80Hz shelving (+/- 15dB Maximum) Meters  11 POINT LED METERS (-20, -15, -10, -7, -5,-3, 0, +1, +2, +4, +6dB) Graphic Equalizer  9 bands (63, 125, 250, 500, 1K, 2K, 4K, 8K, 16KHz) Internal DSP Effects  24 BIT -  10 Presets each: 00-09 Performance; 10-19 Hall Reverb, 20-29 Plate Reverb; 30-39 Spring Reverb; 40-49 Echo; 50-59 Flange + Verb; 60-69 Chorus + Verb; 70-79 Echo + Verb; 80-89 Chorus; 90-99 Flange Phantom Power  +48V CLIP Indicators Turn on  THD> 0.1% Foot Switch  DIGITAL EFFECT MUTE: ON/OFF GENERAL Power Requirement: 120V/60 Hz, 240V/50Hz (Country Specific) Power Consumption: 2100W,MAX. Weight: 50.6 lbs./23.5Kg Dimensions:  21 1/2” (W)x 6 1/4” (H) x 21” (D) 622mm (W)x 159mm(H) x 533mm (D)   * 3 Year Manufacturer's Warranty

E-mail a friend about this item.

RETURN TO SEARCH RESULTS LIST