| SAMSON SX2800
1800 WATT DUAL FAN HIGH POWER AMPLIFIER
The Samson SX Series stereo power amplifiers have been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and installers. Their convenient 2 rack-space design is compact, and yet there’s plenty of power available,with 2 x 700 watts at 8 ohms and 2 x 900 watts at 4 ohms. That power rating is over the full frequency spectrum, from 10 Hz to 55 kHz, which helps give the SX amps their natural and open sound quality. For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more power, with power ratings of 1800 watts for the SX2800 into an 8 ohm load.
Input connections are made via Combination connectors allowing for both balanced XLR and balanced 1/4” TRS connections. For the outputs, the SX series amplifiers provide standard 5-way binding posts, as well as a Speakon™connectors. Front-panel controls and displays include a power switch with LED indicator, as well as independent left and right channel input level controls. To help you set the correct operating levels, the SX amplifiers include front panel Signal, Peak and Protection LED indicators. Like all serious power amplifiers, the SX Series internal electronics are based around a serious power-core, with over-sized toroid al transformers and large extruded heat sinks.
To keep the SX amplifiers running cool, their designs employ twin internal wind tunnels with forced-air cooling via two temperature-sensitive, variable speed fans, which greatly reduces the chance of thermal and overheating problems. Multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage, assures high reliability under the most demanding situations. The SX amps are road tough with their all steel chassis, 19-inch rack mount design and convenient carry handles, the SX amplifiers are ready for a life of travel, or to make home in a nice fixed installation. Optimized for live sound venues, houses of worship, commercial installations, and for driving small and medium-sized live PA systems, the SX amplifiers will deliver reliable power from gig-to-gig, venue-to-venue and day-to-night.
Features
- Professional High Power, Class H, Rail-switching Amplifier
- 700 Watts per side @ 8 Ohms
- 900 Watts per side @ 4 Ohms
- Dual Variable-speed Fan Cooling
- Signal, Peak, and Protection Circuit Indicators
- 5-way Binding Post and Speakon™ Speaker Outputs
- XLR and TRS Input Connections
- Dual Rack Space Design
Specifications
Rated Output Power:
Stereo both channel driven
8 ohms: 700 Watts
4 ohms: 900 Watts
Bridged mono
8 ohms: 1800 Watts
Signal to Noise Ratio (20Hz-20k): 104dB
Distortion (SMPTE-IM): 0.04%
Input sensitivity: @8ohms 1.24V(4dBu)
Voltage Gain: 35dB
Output Circuitry: H
Current Consumption(115VAC)
@1/8 rated power 4ohms: 8.5A
@1/3 rated power 4ohms: 17A
@ rated power 4ohms, max.: 32A
Distortion(typical @4 ohms)
20Hz-20kHz,10dB below rated power: 0.03%
IkHz,rated power: 0.1%
Frequency Response @8ohms 1Watt
0/-0.5dB:20Hz-20kHz,0/-3dB:5Hz-60kHz
Damping Factor(400Hz): 350
Input Impedance: 15k ohm Unbalanced, 30k ohm Balanced
Input Clipping: 10Vrms(22dBu)
Cooling: Continuously variable speed, fan forced air
Connectors (each channel)
Input: Active balanced combo and1/4”(6.3mm)TRS
Output: 5-way Binding post and Speakons
Controls: AC power switch, Channel 1 and 2 volume
Indicators
Power on (blue), Protection (amber), Signal (green) for each Channel, Peak (red) for each Channel.
Protection:
Short circuit, Thermal, Current limit, DC offset, Current inrush, RF protection, Turn on/Turn off muting
Power Requirements 100/115/220/230/240 VAC, 50/60 Hz
Dimensions (WXHXD):
19”(483mm)X3.5”(89mm)X16”(408mm)rack mounting to rearsupport
Net Weight: 47lb.(21.1kg)
* 1 Year Manufacturer's Warranty
|
Sign In
