| Hartke KM200
15" 200 Watt Keyboard Monitor Amplifier
The KM200 is the perfect solution for just about any keyboard player who needs a flexible mix/monitor system to handle a sophisticated instrument rig, and who demands a high-quality amplifier that faithfully reproduces the sound, nuances, and soul of their performance. The KM200 achieves this goal by delivering a solid 200 watts of power driving a classic Hartke 15-inch aluminum cone low frequency driver. For increased high frequency performance, there's also a 1-inch titanium compression driver. Enclosed in an innovative kickback cabinet, the KM200 provides a powerful, full-range 2-way professional monitoring system. And for added versatility, it can even be used as a monitor system for electronic drums.
For players with multiple keyboards and sound modules, an additional mixer isn’t needed because the KM200 has one built-in. The mixer features a stereo input with2-band EQ and mic input, as well as three additional stereo inputs, giving you a total of four stereo channels, plus a stereo aux in, advanced signal routing and special headphone monitoring capabilities. In fact, you’ll have independent control of local, PA, and headphone monitor mixes.
The KM200 also features a powerful 7-band graphic equalizer allowing you to set a customized frequency response contour that’s perfect for your sound. It also helps you hear yourself better on stage.
Convenient casters make the KM200 easy to transport and solid construction makes it a reliable performer from night-to-night and venue-to-venue. With professional performance and exceptional versatility, the KM200 will offer power to spare and tone to bring the house down.
Features
-
Four Channel Keyboard amplifier with Stereo Mixer
-
1 stereo channel with 2-band EQ and microphone input, plus 3 additional stereo input channels
-
200 Watts with 2-way Speaker enclosure
-
Innovative Kickback enclosure design allows the sound to be projected up at the player
-
15-inch Aluminum Cone Woofer
-
1-inch Throat , 34 mm Titanium Compression Driver
-
7-band graphic equalizer
-
Independent Local, PA and Headphone monitor mixing
-
Casters included
- Rugged construction makes the KM200 eminently road-worthy
Nominal Input Level
Mic Input (CH1) -50 dBu.
Line Inputs ( CH1 - CH4) -20 dBu.
Nominal Output Level
Line Out +4 dBu
Stereo Line 0 dBu
Rated Output Power 200 watts
Total Harmonic Distortion less than .5%
Equalizer
Channel 1 Bass: ±15 dB @ 100 Hz
Channel 1 Treble: ±15 dB @ 10 kHz
Seven-Band Graphic (Main Output): ±15 dB, center @ 100 Hz, 250 Hz, 500 Hz, 1 kHz, 2.5 kHz, 5 kHz, 10 kHz
Insert Send Output Level 0 dBM
Insert Return Input Level 0 dBM
Connectors
Ch1-4 Input L (mono): 1/4” phone
Ch1-4 Input R (mono): 1/4” phone
Mic Input: XLR
Mic Insert: TRS 1/4” phone
Ch1-4 Input L (mono): 1/4” phone
Ch1-4 Input R (mono): 1/4” phone
Line Output L (mono): 1/4” phone, XLR
Line Output R (mono): 1/4” phone, XLR
Aux In Left and Right: RCA
External Mixer In: TRS 1/4” phone
Into Phones Only: TRS 1/4” phone
Stereo Link Input: 1/4” phone
Stereo Link Output: 1/4” phone
Headphone - St.: TRS 1/4” phone
Speaker Output: 1/4” phone
Speaker System Impedance (Ohms) 4 Ohms Impedance
Low Frequency Drivers 15" Special Design 8 ohm, 200 watt Speaker
High Frequency Driver 1” Throat Compression Driver
Weight 74.8 lbs. (34 kg)
Dimensions
Height:18.25" (46.5 cm)
Width:22" (56 cm)
Depth: 21.25" (54.0 cm)
|
Sign In
